If your business operates out of a commercial building, the chances are that at one point you’ll see someone painting an office space in your building. Unless the rooms were all freshly painted when you rented the area, it’s likely that you have a place or two that require a fresh paint job to look nice. If you already know how to paint a room, you might even try it yourself.
But painting a room isn’t as easy as it sounds. It requires a lot more than a few cans of paint, some rollers, and a day to let it dry. There are many steps and considerations to be taken along that way that could make or break your paint job should you fail to carry them out.
Let’s go through the process of painting a room in a commercial building or office space so you can know of everything you need to know. We also outline everything you need to remember before you begin the process of painting it or hiring professional facility services.
How to Paint a Room – Office Edition
The first thing you should do is pick out which office paint colors you want in your room. If you don’t want to deal with the many problems that cheap paint can bring, you should shop around for the best interior paint you can find. Your business deserves nothing less than the best.
Next, you’ll need the proper equipment like hand rollers, paint primer, plastic to lay down on the floors, and any specific painting tools you might need to paint around windowsills or other features on the walls, like paint sprayers.
One important thing to keep in mind is that you’ll need to have a small step ladder available and long paint handles to reach all the way to the ceiling. Be sure only to use synthetic bristles if your paint is latex-based because natural bristles will clog up and absorb water.
Make sure to prep the wall before you paint it, removing any grease or grime, and sanding away any rough spots. Dry the area well before you start painting.
You should try to get the entire room done in a single day if possible. Remember to do a thorough job, so there are no thin spots or missed areas. If you find yourself painting over new plaster, heavily soiled areas, or wallboard, you’ll want to apply a sealer coating on the substrate before you begin.
If you wish to apply a second coat, it’s best to do it in the same timeframe, so you don’t have to go through the process of re-prepping the area. This is a simple instruction on how to paint a room; the reality is that there is more that goes into it.
Harder Than It Sounds
If all these steps seem like extra work, we recommend hiring facility management services that know how to paint a room. They can get it done quickly, easily, and professionally. Best of all they already have all the materials on hand!